It is vital to correctly service Reverse Osmosis (RO) plants to ensure they run effectively and produce the all-important water requirements your company demands! For example, it is not all that difficult to do extensive damage to the RO membranes in a relatively short period of time.

Salt Separation Services have a team of specialist service engineers, who can draw on years of knowledge and experience with both our own and other manufacturers RO plants, to ensure they run correctly and to prevent unnecessary failures which could result in the loss of water production with the associated consequences this may entail.

The key benefits of using Salt Separation Services engineers for your RO plant servicing are:

• Early detection of faults before they become apparent to the operator or become worse.
• Prevention of equipment failure by detailed inspection, calibration and function testing.
• Carry out troubleshooting and fault finding on the RO plant.
• Notice and suggest the need for improvement in either production or efficiency of the plant.
• Undertake operator training to build up the knowledge of the RO plant operator.
• Quality Management System fully in accordance with BS EN ISO 9001:2008.
• Extensive range of support spares and consumables available.
• Use of calibrated and traceable test instrumentation and equipment. 

Salt Separation Services are able to package process plants based on a client’s design.

Products types include filtering, desalination, water purification, UV disinfection, chemical dosing and any application where there is a combination of vessels, valving, piping, pumps, instrumentation, controls and filters, in order to avoid the high costs of site assembly and ensure we meet our high quality standards.

All types of process plant can be skid-mounted, which makes installation easy and reduces the requirement for on-site fabrication. With a fully welded construction, our package units can be purpose-produced to all industries according to individual customer specifications. We liaise closely with our clients to ensure that we fulfil all requirements. Maximum dimensions are metres wide by metres long per section, and up to 10 tonnes in weight.

Non-Destructive Testing (NDT) can be carried out on all products before despatch, including Leak Testing, Hydrostatic Pressure Testing, Load Testing, Magnetic Particle Inspection, Positive Material Identification and Radiography.

Products can be finished using a range of techniques which include shot and bead blasting, polishing, painting, pickling and passivating, FBE coating and rubber lining.

Salt Separation Services can supply a skid package design service which will give clients a range of options including the incorporation and calculation of piping systems, vessel fabrication, pneumatic and electrical systems, instrumentation and insulation, as well as performance/function testing. 

We have recently designed and commissioned a hazardous area (Zone 2, IIB, T3 classification) smoke detection system which has been integrated with one of our containerised hire plants. The plant capable of producing up to 100 m3/d of potable water, is on a North Sea oil platform. The plant is located in a non‐hazardous area of the platform however our client requested a system to interrupt the plant power supply on detection of smoke within the container as an added safety measure. The detection system itself remains safe and operational even if a hazardous environment develops.

The Zone 2 system consists of two flameproof (Ex d) enclosures housing a fire panel, isolation barriers (for the intrinsically safe smoke detector heads) and control equipment. Although using a standard industrial fire panel housed within a flameproof enclosure, the fire panel can be operated remotely from controls mounted in one of the flameproof enclosure doors. On detection of smoke the system will cut power to the plant and provide visual and audible warnings via a flameproof (Ex d) flashing beacon and siren. 

Allied Calibration Engineering Services SDN. BHD is our official distributor in Malaysia.

ALLIED CALIBRATION ENGINEERING SERVICES SDN. BHD. (ACES) was incorporated on 14th May 1994 as a private limited company licensed with PETRONAS and Ministry of Finance, Malaysia. The company is initiated, owned and managed by a dedicated team of three executive directors with extensive experiences in small medium-sized engineering design, project and construction management. It has since grown from a modest engineering company into one of Malaysia’s leading small medium-sized companies. ACES are engaged mainly in the oil, gas and petrochemicals business activities and maintenance of water treatment plant equipment.

Their engineering services include:

• Manufacturing of Chemical Injection Skid Packages
• Engineering Project Management / M&E Engineering Works (CIDB Grade G7)
• Calibration of Pressure & Temperature Measurement Instrument (MS ISO / IEC 17025)
• Repair & Refurbishment of Mechanical Seals (Wet/Gas) and Auxiliary System
• Repair & Maintenance of Pumps and Couplings
• Repair & Maintenance of Water Treatment (Raw/Treated) Pumps (SPAN Permit IPA Jenis D)

In March 2013 Salt Separation Services Director Daniel Shackleton met with ACES representatives in Kuala Lumpur to help promote our products and services in the region. 

At the Rochdale Business Awards, Daniel Shackleton and Stephen Grindrod were named jointly as Businessman of the Year.

Almost 300 people attended the awards at Rochdale Town Hall on Friday 2nd November.

Guests from businesses across the borough enjoyed a champagne reception and casino before moving into the Great Hall for a meal and a glamorous awards ceremony.

The event – dubbed the Oscars of the Rochdale business world – was organised to recognise and celebrate the achievements of businesses in the borough. It is expected to have raised in the region of £3,000 for Springhill Hospice.

Salt Separation Service were also runners up in the Business of the Year (>£5M turnover) category.

Salt Separation Services have been successfully supplying customers all over the globe with water treatment and waste water treatment spares, consumables and special tools for over 20 years.

We are not only able to supply spares for our own manufactured plants but because of our vast experience we are also able to support all of our competitor's plants. As an example we can supply direct membrane replacements for your plant or we can recommend suitable alternatives for retro-fitting.

As a company we pride ourselves on our professional levels of service, technical knowledge and rapid response. When dealing with Salt Separation Services you will find us helpful with all your requirements

Our company has the ability to offer you excellent logistical support no matter where you need the goods sending.